Aller au contenu

Nouveau membre ?! Pense à te présenter pour accéder au contenu du forum !

New member ?! Introduce yourself to get access to the forum !

Messages recommandés

 

Required Level  : Beginner

Estimated Time : Between 15 & 30 minutes

 

Disclaimer : This guide is only a translation of the following tutorial made by Emulateur and then renewed by Calypso. The screenshots are still in French as for now and the tutorial may be aged but still works like charm. [.To be continued.]

 

Hey there!

 

You want to create a metin2 private server? You want to play with your friends? Create a community or create one just as a hobby? Then follow this guide!


I will explain you how to create a private server! You will then be able to do whatever you want on it? Ain't it cool? B|

Buuut... This tutorial will work only in localhost, implying that you will be the only one able to connect and play on it. It's some kind of a test server.


Ready? Go!

 

I. Downloads
 

 

II. Virtual Machine

Révélation

 

1. Install VirtualBox. You will use it as a way to emulate the Operating System called FreeBSD. (The server will run on this OS)
2. Start VirtualBox
3. Click on "New" at the bottom left of the screen.

065706Capture.JPG

4. Choose a name and name the Virtual Machine. Choose BSD for Type and FreeBSD (XXbits depending on your OS, most likely 64bits) in Version. Then click on Next

070028Capture.JPG

5. Allocate the amount of RAM of your choice to the Virtual Machine. Note that you'll be fine with 2048Mo (It might even be overkill for a server you'll only use alone). The minimum I advise you to allocate is 1Go (1024Mo). Anyway, as long as you're in the green bar you're fine. Click Next.

070335Capture.JPG

6. Tick the "Use and already existing virtual disk" (Or something like that, that's the last box) and select the VDI (.vdi) you just downloaded in Step 1. Then press Create.

073719Capture.JPG

7. Your Virtual Machine is now created. Now let's configure the Networking. Right click on your VM (Virtual Machine) then hit Configuration

073848Sans-titre.jpg

8. In Network, select "Bridged" for Networking Mode and in Name, select your Networking Card. Then click OK.

074029Capture2.JPG

9. The networking is now selected and the Virtual Machine created! Let's go to step three.

Information: If you are under WiFi, select your WiFi adapter, otherwise, if you use Ethernet, use your Ethernet adapter.
Success ! You created your Virtual Machine. It will hosts your first Metin2 server!

 

 

III. Start your server

Révélation

 

1. If you want to start the VM, you just have to double click on it. The Virtual Machine will start. Wait a bit. Now it asks you to connect a user.

074910Capture.JPG

2. In login, put: root and in Password, write mcncc.com or ;cncc<co;. You are now fully connected as a super user. If you want to start the files, begin with typing cd /usr/metin2

Information: You won't see what you type in password, it doesn't mean it's not working, it is just hidden.
Warning: If your keyboard is a QWERTY keyboard, the right password is ";cncc,co;". (Also refer to this comment for further instructions)

 

074157Capture2.JPG

4. Now you are in the metin2 files folder. You just have to type to start it : sh start.sh (and sh stop.sh to close it). And then the number of channel that you want to open. One channel is perfect to begin with.

074344Capture2.JPG

5. Your Metin2 server is now working ! You just have to configure the client ! Of course, you need to leave Virtual Box open if you want your server to be openned as well.

 

Warning! The more channels you open, the more RAM will be used. For testing purposes, 1 is more than enough.
Success! Your server is now online! Don't forget to keep VirtualBox open to keep your server online.

 

 

IV. Connection to the client !

Révélation

 

1. Extract the file Client 2014.rar on your computer, i.e your Desktop.
2. Then, you need to configure the serverinfo.py  and put your ip inside. Here's a guide for it (Still in French ATM) : Configurer votre client pour la première fois

 

075113Capture.JPG


4. In my case, it's 192.168.43.205 That's the one we're after !
5. Once the configuration is done, start metin2client.exe which is at the root of your client.
6. Use these already existing admin credentials : User: admin Password: test || You can change them or create a new one later on.
7. Choose your character, and voilà ! Your connected on your first Metin2 private server !

Success! You are now connected on your server!

 

 

V. Gain access to the files

Révélation

 

1. If you want to inspect or modify the files, you need to install the software "WinSCP". Once it's installed & started, do as explained below.
2. Click on "New Site" and do as the following screenshot.

070007Sans-titre.png

Information: Don't forget to use your local ip starting with 192.168.x.x and which you obtained above.


3. Now you're connected to WinSCP. You can now browse through the files with a software instead than a terminal.
4. Click on .. to go at the root, then click on usr then metin2. You should be there:

070237Capture.JPG

5. These are the Folders & Files that your server contains !

Success! You are now browsing your server files!

 

 

 

VI. Gain access to the database

Révélation

 

1. The database contains pretty much everything related to players, account and so on. Install Navicat and start it.
2. Click on Connect then MySQL


070656Capture.JPG

3. Fill it like this:

  1. Name
  2. The IP you saw before (starting with 192.168)
  3. 3306
  4. root
  5. mcncc.com

071420Capture.JPG

4. On the left pannel you can see your server. In order to connect, you just have to click two times over it.

071556Capture.JPG


5. And this is the database of your server !

Success! You are now able to browse the database.

 

 

Success! You just created a local private server!

 

VII. End of the Tutorial

 

Now, everything is alright, you can connect to the database, browse your files and edit your client ! You can now modifiy everything as you want :)

FAQ - Must Read for beginners - (Still in French ATM) : https://funky-emu.net/topic/21355-faq-le-serveur-metin2-pour-les-débutants/?do=getNewComment

 

If you need some help, don't hesitate and lead to Questions & Answer. The community will be there to help you.
Good luck!

Partager ce message


Lien à poster
Partager sur d’autres sites

Waaah

Partager ce message


Lien à poster
Partager sur d’autres sites

Hello, @Gurgarath i have a problem in step III. I enter "root" and "mcncc.com" and it says log in incorect. Whats the problem ??

Partager ce message


Lien à poster
Partager sur d’autres sites
il y a 13 minutes, Bakaru a dit :

Hello, @Gurgarath i have a problem in step III. I enter "root" and "mcncc.com" and it says log in incorect. Whats the problem ??

Hello,

It might be possible that your keyboard is in QWERTY in that case try to type ";cncc,co;". If it's not in QWERTY the right password is still "mcncc.com".

Also, it's normal if nothing appears when you try to type the password.

 

Best regards.

Partager ce message


Lien à poster
Partager sur d’autres sites

Correct, my keybord is in QWERTY and i type what you said. It worked. Many thanks !!

Partager ce message


Lien à poster
Partager sur d’autres sites

You are welcome and thanks for the report! I edit the tutorial as it's more common to have a QWERTY than a French AZERTY when it comes to international tutorials :D

 

Partager ce message


Lien à poster
Partager sur d’autres sites

@Gurgarath i forgot to mention that in order to type the dot  "." i pressed "shift + ,"   so the correct character is "<". The correct answer is ";cncc<co;". You can check it out too.

 

Edit: I saw that further typing is required. So is there a way to change the keyboard setup to QWERTY to make things easier ??

 

Edit2: I eventually have found a way to change the keyboard layout to QWERTY. Follow this

and instead of "French ISO keymap" select "Central European ISO".
All credit goes to @Iron.

Modifié par Bakaru

Partager ce message


Lien à poster
Partager sur d’autres sites

Hello,

 

New link : (it's french content) 

 

Partager ce message


Lien à poster
Partager sur d’autres sites

Hello,

 

I will update the tutorial pretty soon. The original one has been rewritten once again and left this one slightly outdated. Thanks for the report! :)

 

Best regards,

Partager ce message


Lien à poster
Partager sur d’autres sites

Hello,

 

The tutorial has been updated!

 

Best regards,

Partager ce message


Lien à poster
Partager sur d’autres sites

×

Information importante

By using this site, you agree to our Conditions d’utilisation.